"Great help, gave me good advice very helpful"
Reticulation Solenoid Repairs & Replacement in Perth
A station that won’t turn on, or one that won’t shut off, is almost always a faulty solenoid valve. We locate, test and repair or replace it fast – often on the spot.
To book a solenoid repair call (08) 6263 4644 or send a booking enquiry.
4.7/5 from 230+ Google reviews
Perth’s solenoid valve locating & repair specialists
A reticulation solenoidis the electric valve that opens and closes each watering zone. When one fails, that station won’t turn on – or won’t stop running. We’re one of the few Perth teams with specialised solenoid locating equipment, so we find even buried or lost valves in minutes, then repair or replace them with quality irrigation-brand parts. Solenoid work falls under our standard repair pricing (a $160 minimum charge, then $40 per extra 15 minutes plus parts) and, like all repairs, is booked, not quoted.
Signs of a faulty solenoid valve
Solenoids are one of the most common reticulation faults we’re called out for. Watch for any of these:
- A station that won't turn on when the controller runs it
- A zone that won't shut off and keeps watering
- A valve that buzzes or clicks but no water flows
- Water weeping from a valve box or constant low-level flow
- One zone with weak pressure while the others are fine
- The controller runs fine but a single zone is dead
How we locate & fix solenoids
First we confirm the cause – a dead station can be the solenoid, the wiring or the controller, and we don’t replace parts that aren’t the problem. Once we’ve traced it to the valve, our specialised locating gear pinpoints even buried or lost solenoids in minutes.
We then repair or replace the solenoid with a trusted irrigation-brand part – never a hardware-store valve – test every zone, and reset your controller to Perth’s watering roster before we leave.
Solenoid faults are covered under our reticulation repairs service, with the same honest, upfront pricing.
Hear From Our Happy Customers...
"These guys came out and fixed my issue in short order. Great job!"
"They were tied up so I had to wait a couple of weeks but very happy with the service provided by their tech Dylan. I recommend them and will use them again if I need retic repairs"
"The tech was great - has improved our system for easy 3 x the efficiency. Would def go back if ever I need to"
"Great service very professional staff"
"Highly Recomend"
Reticulation Solenoid FAQs
Most of the time, a station that won't turn on (or one that won't shut off and keeps running) comes down to a faulty solenoid — the electric valve that opens and closes each watering zone. Solenoids fail from age, dirt in the diaphragm, a wiring or controller fault, or a stuck plunger. We test the valve, the wiring and the controller to confirm it's the solenoid before repairing or replacing it, so you're not paying to swap a part that wasn't the problem.
Solenoid repairs and replacements fall under our standard repair pricing: a $160 minimum charge, then $40 for each additional 15 minutes on site, plus the solenoid part. In most cases we locate, test and replace a faulty solenoid on the spot. Because the fault can't be confirmed until we test the system, repairs are booked, not quoted.
Yes — this is one of our specialities. We're one of the few reticulation companies in Perth equipped with specialised solenoid locating equipment, and our technicians are trained to use it effectively. What might take another company half a day of digging can take our team an hour or less, which keeps the cost down and gets your system working sooner. We can also mark the locations on a plan for future repairs.
It depends on the cause. A solenoid that's simply dirty or has a stuck diaphragm can often be cleaned and rebuilt; one that's failed electrically or is corroded is better replaced with a quality valve that will last. Our technician will tell you what they recommend and why — we use trusted irrigation-brand parts, not hardware-store valves, so the fix lasts.
Station won’t turn on or won’t shut off?
We’ll locate the solenoid, confirm the fault and fix it – fast.
Perth’s solenoid repair specialists
Faulty solenoid valves are our bread and butter – located fast, fixed properly, backed by more Google reviews than any other local retic team.